Product Capabilities & Specifications

A comprehensive reference for international distributors, fleet procurement managers, and aftermarket parts buyers evaluating IronForge Auto's product range. This document covers our three core product lines — Engine Components, Filtration Products, and Maintenance Components — with detailed specifications, material options, vehicle coverage, OE reference matching, and private label capabilities.

IronForge Auto is a factory-backed international trade supplier specializing in aftermarket replacement parts for commercial vehicles, heavy-duty trucks, light commercial vehicles, and passenger vehicles. We serve distribution partners across the Middle East, Africa, South America, and Southeast Asia.

Quality Foundation: All products described in this document are supplied through quality-controlled manufacturing partners operating under ISO 9001:2015, IATF 16949:2016,certified quality management systems. Every production lot undergoes 100% pre-shipment inspection (PSI) before export.

---

Product Line Overview

Product Line	Categories	Reference Coverage	Primary Markets
Engine Components	Full gasket sets, cylinder head gaskets, sealing components	200+ OE references	Heavy-duty, commercial, LCV, passenger
Filtration Products	Oil, air, fuel, cabin, hydraulic filters	800+ reference numbers	All vehicle platforms
Maintenance Components	Hose clamps, cooling system components	300+ size variants	All vehicle platforms

---

Engine Components

Aftermarket replacement engine gaskets and sealing components for complete overhauls through individual component replacement. Every product is matched to the corresponding OE reference number for precise fitment verification.

Product Categories

• Full Engine Gasket Sets — Complete upper and lower engine kits covering cylinder head, valve cover, intake, exhaust manifold, oil pan, and auxiliary seals in a single package
• Cylinder Head Gaskets — Available in MLS (Multi-Layer Steel), graphite, composite, and copper materials
• Valve Cover Gaskets — With integrated spark plug tube seals where applicable
• Intake & Exhaust Manifold Gaskets — Material-matched to application requirements
• Oil Pan Gaskets & Crankshaft Oil Seals — Front and rear seals for engine bottom-end service
• Turbocharger Gasket Kits — Complete sealing kits for diesel turbocharger applications

Material Specifications

Material	Application	Key Properties
MLS (Multi-Layer Steel)	Modern engines with high cylinder pressures, turbocharged diesel engines	Precision-embossed stainless steel layers, high recovery rate, excellent seal under thermal cycling
Graphite / Fiber Composite	Older engine designs, naturally aspirated gasoline engines	Good conformability, consistent thickness, cost-effective for standard applications
Copper	Performance and heavy-duty applications	Superior thermal conductivity, excellent conformability, requires proper annealing
Rubber-Coated Metal	Valve cover and oil pan applications	Integrated sealing bead, reusable in some applications

Key Specifications

Specification	Detail
Material Options	MLS, Graphite, Composite, Copper, Rubber-coated
Gasket Types	Cylinder Head, Valve Cover, Intake, Exhaust, Oil Pan, Turbo
Kit Coverage	Full upper + lower engine sets available
Thickness Range	0.5 mm – 3.0 mm (application-specific)
Vehicle Coverage	Heavy Duty, Commercial, LCV, Passenger platforms
MOQ (Gasket Sets)	50 sets per reference
MOQ (Individual Components)	100 units per reference
Stock Lead Time	7–15 days
Production Lead Time	20–45 days

Vehicle Coverage — Representative Applications

Brand	Model	Year Range	Engine	Product Type
Volvo Trucks	FH	2002–2024	D13	Full Gasket Set, Cylinder Head Gasket
Toyota	Hilux	2005–2024	1GD-FTV / 2TR-FE / 1KD-FTV	Full Gasket Set, Cylinder Head Gasket
Toyota	Land Cruiser	2007–2021	1VD-FTV	Full Gasket Set, Cylinder Head Gasket
Toyota	Fortuner	2005–2015	2TR-FE	Full Gasket Set, Cylinder Head Gasket
Toyota	Corolla	2000–2007	1ZZ-FE	Full Gasket Set, Valve Cover Gasket
Nissan	Navara	2005–2024	YD25DDTi / YS23DDTT	Full Gasket Set, Cylinder Head Gasket
Nissan	Qashqai	2007–2013	HR16DE	Cylinder Head Gasket, Oil Seals
Ford	Ranger	2011–2021	P5AT / 2.2 Duratorq	Full Gasket Set, Cylinder Head Gasket
Ford	Transit	2014–2024	2.2 Duratorq	Full Gasket Set, Cylinder Head Gasket
Hyundai	Tucson	2004–2010	D4EA	Full Gasket Set, Sealing Components
Hyundai	i30	2007–2012	G4FC	Valve Cover Gasket, Manifold Gasket
Kia	Sportage	2004–2010	D4EA	Full Gasket Set, Cylinder Head Gasket

OE Reference Matching — Representative Sample

Vehicle Brand	OE Reference Number	Description
Toyota	04111-0L020	Engine gasket kit, Hilux 2TR-FE
Toyota	04111-0D080	Engine gasket kit, Corolla 1ZZ-FE
Toyota	11115-0L020	Cylinder head gasket, Hilux 2TR-FE
Toyota	11213-0D080	Valve cover gasket, Corolla 1ZZ-FE
Nissan	10101-VK501	Engine gasket kit, Navara YD25
Nissan	11044-VK501	Cylinder head gasket, Navara YD25
Ford	BK3Q-6051-CA	Cylinder head gasket, Ranger P5AT
Hyundai	20910-2AG00	Engine gasket kit, Tucson/Sportage D4EA
Hyundai	22311-2AG00	Cylinder head gasket, Tucson D4EA

OE Reference Disclaimer: Vehicle manufacturer part numbers are provided for cross-referencing and fitment identification purposes only. IronForge Auto supplies aftermarket replacement parts. Use of a manufacturer's part number does not imply that the part is manufactured, endorsed, or supplied by that vehicle manufacturer.

Cross-Reference to Major Aftermarket Brands

Our engine gaskets are engineered to match the dimensional and material specifications of products from:

IronForge Product Line	Cross-Reference Brand	Representative Part Number
Engine Gasket Kits	Reinz	02-36345-01
Engine Gasket Kits	Elring	EL-834290
Engine Gasket Kits	Victor Reinz	VR-61-34825
Engine Gasket Kits	Payen	PAY-CF3400
Engine Gasket Kits	Ajusa	AJ-522100

---

Filtration Products

Aftermarket replacement oil, air, fuel, cabin, and hydraulic filters manufactured with cellulose and synthetic blend media matched to OE filtration specifications. 800+ reference numbers available across heavy-duty, commercial, LCV, and passenger vehicle platforms.

Filter Types

• Oil Filters — Cellulose and synthetic blend media with anti-drain back valves. Silicone anti-drain back valves available for high-temperature diesel applications
• Air Filters — Multi-layer filtration media with 99%+ efficiency rating per ISO 5011. Panel and cylindrical configurations
• Fuel Filters — Water separation capability for diesel applications. Critical for humid climates in Middle East coastal regions, West Africa, and Southeast Asia
• Cabin Air Filters — Standard particulate and activated carbon options for interior air quality
• Hydraulic Filters — For commercial vehicle hydraulic systems and power steering applications

Filtration Media Comparison

Media Type	Efficiency	Service Interval	Best For
Cellulose	95% at 20 microns	Standard OEM interval	Cost-effective fleet maintenance, standard service
Synthetic Blend	97% at 20 microns	Extended interval capable	High-mileage fleets, severe operating conditions
Full Synthetic	99% at 15 microns	Maximum extended interval	Premium applications, extended drain intervals

Key Specifications

Specification	Detail
Filtration Media	Cellulose, Synthetic Blend, Full Synthetic
Oil Filter Efficiency	95%+ at 20 microns (ISO 4548-12)
Air Filter Efficiency	99%+ efficiency (ISO 5011)
Filter Types	Oil, Air, Fuel, Cabin, Hydraulic
Anti-Drain Back Valve	Present on all oil filters (silicone or nitrile)
Bypass Valve	Calibrated to engine oil system specification
Canister Burst Rating	Exceeds maximum system pressure with safety margin
Packaging	Individual box with anti-counterfeit holographic label and traceable barcode
MOQ	500 units per reference
Stock Lead Time	7–20 days
Production Lead Time	25–40 days

Vehicle Coverage — Representative Applications

Brand	Model	Year Range	Engine	Filter Types
Volvo Trucks	FH	2002–2024	D13	Oil, Fuel
Toyota	Hilux	2015–2024	1GD-FTV	Oil, Air, Fuel
Toyota	Land Cruiser	2007–2021	1VD-FTV	Oil, Air, Fuel
Nissan	Navara	2015–2024	YS23DDTT	Oil, Air, Fuel
Nissan	Patrol	1997–2010	TB48DE	Oil, Air
Ford	Ranger	2011–2021	P5AT / 3.2 Duratorq	Oil, Air, Fuel
Ford	Transit	2014–2024	2.2 Duratorq	Oil, Air, Fuel
Hyundai	Santa Fe	2012–2018	D4HB	Oil, Fuel, Cabin
Kia	Sorento	2012–2018	D4HB	Oil, Air

OE Reference Matching — Representative Sample

Vehicle Brand	OE Reference Number	Product Type
Toyota	90915-YZZJ1	Oil filter, various models
Toyota	17801-0L020	Air filter, Hilux 2TR-FE
Nissan	15208-VK501	Oil filter, Navara YD25
Hyundai	26300-35503	Oil filter, various models
Ford	2249300	Oil filter, Ranger 3.2L
Ford	1937263	Air filter, Transit 2.2L

Cross-Reference to Major Aftermarket Brands

IronForge Product Line	Cross-Reference Brand	Representative Part Number
Oil Filters	Mann	MANN-HU719/8x
Oil Filters	Mahle	MAHLE-OX339/2D
Oil Filters	Bosch	BOSCH-F026407132
Oil Filters	Fram	FRAM-PH9837

---

Maintenance Components — Hose Clamps

Aftermarket replacement hose clamps in stainless steel (304/316) and zinc-plated carbon steel. Five clamp types covering diameters from 8 mm to 200 mm with band widths of 9 mm, 12 mm, 14 mm, and 20 mm.

Clamp Types & Applications

Clamp Type	Best Application	Diameter Range	Material Options
Worm Gear	General-purpose hose connections — radiator, heater, and coolant hoses	8–200 mm	304 Stainless Steel, Zinc-plated Carbon Steel
Spring	Coolant hoses with thermal cycling — self-adjusts as hose compresses over temperature range	10–60 mm	High-tension Spring Steel
T-Bolt	Turbocharger and intercooler piping — high clamping force for boosted applications	25–200 mm	304/316 Stainless Steel
Constant-Tension	Severe thermal cycling applications — maintains consistent clamping force through temperature changes	12–80 mm	304 Stainless Steel with spring mechanism
Wire	Low-pressure fuel and vacuum lines — simple, cost-effective design	6–30 mm	Zinc-plated Carbon Steel

Material Selection Guide

Material	Corrosion Resistance	Temperature Range	Best For
304 Stainless Steel	Good general corrosion resistance	-40°C to +200°C	Most under-hood applications, general-purpose use
316 Stainless Steel	Excellent — resistant to chlorides and salt	-40°C to +250°C	Marine environments, coastal regions, chemical exposure
Zinc-plated Carbon Steel	Moderate — for protected installations	-20°C to +120°C	Interior applications, cost-sensitive projects with no corrosion exposure

Key Specifications

Specification	Detail
Materials	304/316 Stainless Steel, Zinc-plated Carbon Steel
Clamp Types	Worm Gear, Spring, T-Bolt, Constant-Tension, Wire
Diameter Range	8 mm – 200 mm
Band Width	9 mm, 12 mm, 14 mm, 20 mm
Band Edge Treatment	Deburred, smooth edges — no sharp corners
Corrosion Testing	Salt spray tested per ISO 9227 (stainless steel types)
MOQ	1,000 units per size
Stock Lead Time	7–15 days
Production Lead Time	20–30 days

Vehicle Coverage — Representative Applications

Brand	Model	Year Range	Engine	Clamp Types
Volvo Trucks	FH	2002–2024	D13	T-Bolt, Constant-Tension
Toyota	Hilux	2005–2024	1KD-FTV / 1GD-FTV / 2TR-FE	Worm Gear, Spring
Toyota	Land Cruiser	1998–2021	1FZ-FE / 1VD-FTV / 2UZ-FE	Worm Gear, T-Bolt
Nissan	Navara	2005–2024	YD25DDTi / YS23DDTT	T-Bolt, Worm Gear
Nissan	Patrol	1997–2016	TB48DE / ZD30DDTi	Constant-Tension, Worm Gear
Ford	Ranger	2011–2021	P5AT / 2.2 Duratorq	Constant-Tension, T-Bolt

OE Reference Matching — Representative Sample

Vehicle Brand	OE Reference Number	Product Type
Toyota	96136-42101	Radiator hose clamp, various Toyota models
Toyota	90466-41001	Spring clamp, coolant hose
Nissan	16439-VK501	Turbocharger hose clamp, Navara YD25
Nissan	01553-00641	Worm gear clamp, various Nissan models
Ford	BK3Q-8287-AA	Intercooler hose clamp, Ranger P5AT
Hyundai	25451-2F000	Radiator hose clamp, various Hyundai models

Cross-Reference to Major Aftermarket Brands

IronForge Product Line	Cross-Reference Brand	Representative Part Number
Hose Clamps	Norma	NORMA-GBS-120
Hose Clamps	Mikalor	MIK-W4-100
Hose Clamps	Ideal	IDEAL-56-100

---

Custom & Private Label Capabilities

All three product lines are available with private label packaging and custom configuration. This section outlines what we can customize for your distribution brand.

Private Label Options by Product Line

Capability	Engine Components	Filtration Products	Hose Clamps
Branded Color Box	✓	✓	—
Custom Label / Sleeve	✓	✓	✓
Neutral White Box / Bulk	✓	✓	✓
Custom Canister Color	—	✓	—
Custom Embossing	—	—	✓
Custom Kit Configuration	✓	—	—
Minimum Order Quantity	50–100 units/ref	500 units/ref	1,000 units/size
Lead Time	20–45 days	25–40 days	20–30 days

Custom Parts Development

For requirements that fall outside our standard product range, we offer custom part development through our manufacturing partner network:

1. Requirement Review — Submit your sample, drawing, or specification. Our engineering team evaluates feasibility and provides a quotation within 3–5 business days
2. Prototyping — Pre-production samples delivered in 15–30 days for your approval
3. Sample Verification — Compare the prototype against your original sample or specification
4. Production — Full production run with quality documentation, typically 30–60 days after sample approval

Input Format	Materials Available	Manufacturing Processes
Physical samples	Steel, aluminum, gasket materials, rubber, plastics	Stamping, CNC machining, molding, die-casting
2D technical drawings	—	Precision grinding, surface treatment
3D CAD files (STEP, IGES)	—	Wire EDM, laser cutting

Custom Parts Documentation: Every custom order includes material certificates, dimensional inspection reports, and a certificate of conformance — the same quality documentation package provided with our standard product lines.

---

Packaging & Anti-Counterfeit Measures

All IronForge Auto products are packaged for export with the following standard features:

• Individual Sealed Packaging — Prevents corrosion, contamination, and handling damage during transit
• Part Number & OE Reference Labeling — Product part number, OE reference number, description, and quantity clearly printed on each package
• Lot Number Traceability — Every package carries a production lot number for full traceability back to raw material certificates
• Anti-Counterfeit Features — Holographic security labels, QR codes linking to product verification, and tamper-evident seals
• Multi-Language Labeling — Label language and regulatory markings configured for your destination market

---

Market Presence & Export Coverage

Region	Key Markets	Driving Configurations	Product Focus
Middle East	UAE, Saudi Arabia, Kuwait, Qatar, Iraq	LHD	Heavy-duty engine gaskets, filtration products, commercial vehicle components. SASO/GSO compliance documentation provided.
Africa	Nigeria, South Africa, Kenya, Egypt, Tanzania, Ghana	RHD & LHD (Egypt)	Durable engine repair parts for Toyota, Nissan, and Ford fleet platforms
South America	Brazil, Chile, Peru, Colombia, Argentina	LHD	Full gasket sets, engine sealing components, and filtration products
Southeast Asia	Thailand, Vietnam, Malaysia, Indonesia	RHD & LHD (Vietnam, Indonesia)	Asian vehicle platform parts and routine maintenance components

---

Quality Commitments

Every product line is backed by the following quality commitments:

• 100% Pre-Shipment Inspection (PSI) — Every production lot undergoes dimensional verification, visual inspection, and functional testing before shipment approval
• Material Traceability — Full material certificates on file and cross-referenced to each production lot
• AQL-Based Sampling — Inspection follows AQL Level II, Normal inspection; safety-critical dimensions receive 100% inspection
• Documented Non-Conformance Process — Non-conforming products are identified, segregated, and never shipped. Root cause analysis and corrective action are documented for every incident
• Third-Party Inspection Welcome — We facilitate inspections by SGS, Bureau Veritas, TÜV, Intertek, or your nominated agency

For a detailed walkthrough of our quality management system, testing equipment, and inspection stages, see our Quality Control & Inspection Overview.

---

How to Order

1. Identify Your Requirements — Product type, target OE reference numbers, vehicle applications, and estimated quantities
2. Request a Quotation — Contact our sales team with your requirements. We respond within 1 business day with pricing, lead time, and MOQ confirmation
3. Sample Approval (First-Time Orders) — Request stock samples for physical verification. Samples ship in 3–5 business days
4. Confirm Your Order — Review the proforma invoice with confirmed specifications, pricing, and delivery schedule
5. Production & Quality Inspection — Your order proceeds through production with documented quality checkpoints at each stage
6. Shipment & Documentation — Goods are shipped with full documentation: commercial invoice, packing list, certificate of origin, material certificates, inspection reports, and PSI summary

Ready to evaluate IronForge Auto as your aftermarket parts supplier? Contact our sales team at sales@ironforgeauto.com or via WhatsApp at +86 15007003775. Please include your target OE reference numbers or vehicle applications for the fastest response.

---

Last updated: July 2026 — IronForge Auto Product Team