Our Products
Engine gaskets, oil filters, air filters, sealing parts, and hose clamps — manufactured for the automotive aftermarket
Engine Gasket SetsEngine Full Gasket Set — Complete Overhaul Kit
Complete engine gasket kits covering cylinder head, manifold, valve cover, oil pan, and timing cover for popular engine models
- Material: MLS (head gasket), NBR composite / cork / graphite (other gaskets)
- Gaskets Included: Head gasket, intake/exhaust manifold, valve cover, timing cover, oil pan, plus seals & O-rings
- Thickness Range: 0.4mm–1.5mm depending on gasket type
Oil FiltersSpin-On Automotive Oil Filter — Standard & High-Efficiency
Spin-on oil filters with cellulose and synthetic media options for passenger cars, SUVs, and light commercial vehicles
- Material: Steel canister, cellulose or synthetic media, silicone anti-drain valve, nitrile rubber gasket
- Thread Types: M20×1.5, 3/4″-16 UNF, 3/4″-20 metric (per OEM spec)
- Filtration Rating: 25–40 micron (cellulose), 20–30 micron (synthetic media)
Air FiltersEngine Air Filter — Panel & Cylindrical Types
Panel and cylindrical engine air filters with high dust-holding capacity for passenger vehicle aftermarket replacement
- Material: Resin-impregnated cellulose paper or synthetic non-woven media, polyurethane frame seal
- Filter Types: Panel filters (flat/pleated), cylindrical/radial filters per application
- Filtration Efficiency: 97%–99.5% per ISO 5011 test standard
Sealing PartsAutomotive Sealing Parts — O-Rings, Gaskets, Oil Seals & Rubber Components
Wide range of automotive rubber and synthetic rubber sealing parts in NBR, Silicone, Viton, and EPDM materials
- Material: NBR (standard), Silicone (high-temp), Viton/FKM (fuel/chemical), EPDM (weather/ozone)
- Hardness Range: 40–90 Shore A per customer requirement
- Temperature Range: -55°C to +250°C depending on material selection
Hose ClampsAutomotive Hose Clamps — Spring, Worm Drive, T-Bolt & Constant Tension Types
Full range of hose clamps in stainless steel and carbon steel — spring clamps, worm drive, T-bolt, and constant tension for automotive cooling and intake systems
- Material: 304 stainless steel (standard), 201 stainless (economy), zinc-plated carbon steel (budget)
- Clamp Types: Spring clamps (10–80mm), Worm drive (8–120mm), T-bolt (50–200mm), Constant tension (20–100mm)
- Band Width: 9mm / 12mm / 14mm options depending on type and size